Art DMV Pro Spezifikationen PDF herunterladen (Seite 41)

- 37 -

starting from the bottom-left speaker. An ‘S’ at the end of the line indicates that both mics pick up sound

from both speakers as with normal Stereo miking. An ‘M’ at the end of the line indicates that both mics are

acting in Mono and are sonically isolated from the opposite speaker. In other words, the left microphone

only picks up sound from the left speaker and the right microphone only picks up sound from the right

speaker. Of course, the ‘M’ mode couldn’t really exist in nature, but it can produce interesting sonic results.

Mic Separation:

Sets the separation between the two microphones, from 0 to 2.2 feet.

Number of Taps:

Sets the number of delay taps taken over the course of the delay length. Up to 12 taps are available in the

amplitude and time pattern set by the Shape of Taps control.

Regen Enabled:

In the Dynamic Class, this control sets the input level range that switches the Regeneration amount from

the preset value to 0. Signals that fall within this control’s setting (for example, above –10 dB) have the

programmed Regeneration amount, otherwise, Regeneration is set to 0.

Regeneration:

Sets the amount of delay feedback, from

-99% to +100%.

Negative numbers correspond to inverted

feedback.

Shape of Taps:

This parameter sets the spacing, or shape, of the delay taps in both mono and stereo (L/R) patterns. Stereo

taps are designated with an (L/R) in the LCD and are not available with mono routings.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 60 61

Keine Kommentare

Art DMV Pro Spezifikationen Seite 41