Art TCS Betriebsanleitung PDF herunterladen (Seite 7)

ART TCS Twin Compressor System

5Bypass, Tube, Det.Loop Switches – These 3 switches control the

channel settings.

When depressed, the BYPASS switch completely bypasses the

compressor controls, including output level (It should be noted that this

is an active bypass, so if the unit is unpowered no signal shall pass

through).

The TUBE switch places a 12AX7 tube in the signal path adding tube

warmth and gain.

The DETECTOR LOOP switch selects the rear inserts for the detection

path. This routing is useful for ducking and voiceover techniques.

6V3 Compression Selector –This selects the V3 setting for the given

channel. To learn more about V3 see pg. 11.

7LED Meter and Source Selection – This LED METER bar graph

shows either the input or the output average level (with a peak hold).

The source for the meter is determined via the LED METER SWITCH.

8Output Level – These knobs function as either dual output level

controls or stereo output and pan controls.

9Stereo Link – When engaged the unit functions in Stereo Mode.

While in this mode the LEFT CHANNEL CONTROLS act as the global

controls for the unit with the exception of the detector loop controls.

Gain Reduction Meters – These VU meters show how much gain

reduction is taking place. When set at 0 there is no compression, and

as compression increases, the VU meters move “down” displaying the

gain reduction in dB.

- 8 -

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Keine Kommentare

Art TCS Betriebsanleitung Seite 7