USE AND MAINTENANCE INSTRUCTIONS SPARE PARTS MANUAL Art. 451Art. 451 Art. 451 SArt. 451 S Art. 451 SEArt. 451 SE Art. 451/AArt. 451/A Art. 451/A
A 07 04 ddAfter freeing the components from the packing, check that they are intact and no failure has occurred. After that stick to the following ins
A 07 04 8.1 Lifting run Place the gantry under the vehicle to be uplifted, and the pads by the vehicle lifting points. Start the pumping action
A 07 04 To ensure that the machine operates efficiently and correctly, the operator must follow the instructions listed below, cleaning the machine an
A 07 04 10.0 TROUBLESHOOTING TABLE PROBLEMS POSSIBLE CAUSES SOLUTIONS The cross-beam does not lift the declared capacity. 1 Dirty or faulty max. val
A 07 04 12.0 EXTENDED STORAGE The cross-beam must only be used by authorised personnel. Remember that any use by persons who are not familiar with the
A 07 04 15.0 TESTS Before being packed, the cross-beam underwent functional testing as described below: Lifting functional test and parts in gener
A 07 04 A MANUAL PUMP B OIL FILTER D LOWERING CONTROL VALVE E LOWERING VALVE F CHECK VALVE G PRESSURE GAUGE CONNECTION POIN
A 07 04 1 Pivot 2 Pump piston 3 OR 4 Gasket 5 Suction ball 6 Sealing valve closing wheel 7 Wheel nut 8 OR 9 Lock screw 10 Copper pa
A 07 04 18.0 STRUCTURE EXPLODED DIAGRAM Art. 451 - 451 S - 451 SE FIGURE. 10 18 23 EXTERNAL SHOULDER 24 SPRING 25 SCREW 26 WASHER 27 CYLINDER SUPPORT
A 07 04 1 FRAME 2 EXTENSION 3 PIN 4 WASHER 5 SCREW 6 SCREW 7 NUT 8 PIN 9 DOWEL 10 NUT 11 WASHER 19.0 STRUCTURE EXPLODED DIAGRAM Art. 451/A - 451/A S
A 07 04 Before using the machine, attach the adhesive labels included in this booklet to the cross-beam, referring to the illustration shown below. I
A 07 04 1 LOCK RING 2 EXTERNAL CHAMBER 3 O-RING 4 GUIDE RING 5 LINER 6 STEM 7 O-RING 8 STEM HEAD 9 GUIDE RING 10 GASKET 11 O-RING 12 BOTTOM 13 NIPPLE
A 07 04 21 In order to get better the operations of the machine, and in the meantime to give more safety and functionality to the use of the machine,
A 07 04 NOTES: 22
A 07 04 INSTALLATION REPORT AND FUNCTIONAL TEST ART. ______________ SERIAL NUMBER: _______________ INSTALLATION DATE: ____________________ 1) Th
A 07 04 24 Dealer's stamp 24020 VILLA DI SERIO (BG) ITALY Via Divisione Tridentina, 23 Tel: 035/423.44.11 a.r. - Customer Fax (Italy) 035/423.44.
A 07 04 INSTALLATION REPORT AND FUNCTIONAL TEST ART. ______________ SERIAL NUMBER: _______________ INSTALLATION DATE: ____________________ 1) Th
A 07 04
A 07 04 INSTALLATION REPORT AND FUNCTIONAL TEST ART. ______________ SERIAL NUMBER: _______________ INSTALLATION DATE: ____________________ 1) Th
A 07 04
A 07 04 3 ATTENTION !!! WHEN READING THE MANUAL THE HAZARD SIGNAL IS ENCOUNTERED. THE SIGNAL SHOWS THE PRESENCE OF MORE OR LESS SIGNIFICANT
A 07 04 4 INSTRUCTION BOOKLET CONTENTS: - 1.0 GENERAL - 2.0 SPECIFIC USE 2.1 Product diagram and dimension of the models 2.2 Capacity-Weight table
A 07 04 1.0 GENERAL This booklet is an integral part of the product. Carefully read the warnings and instructions contained in this booklet since th
A 07 04 Art. Capacity [kg] Weight [kg] A [mm] B [mm] C [mm] D [mm] 451 1500 70 925 1255 760 451/A 1500 75 930 1260 760 1235 451 S 1500 70 675 1015
A 07 04 Only specially trained and authorized personnel are allowed to use the gantry. Do not lift loads heavier that those specified by the ma
A 07 04 The sliding gantry is packed with detached pads. The latter are placed in the gantry and packed with the same protective material (Blister pap
A 07 04 6.0 MAIN TECHNICAL FEATURES SHEARING HAZARD AREA The hydraulic pump is manually actuated. The force required to actuate the leve
Kommentare zu diesen Handbüchern